logo
Shanghai Jianggong Valve Manufacturing Co., Ltd.
محصولات
محصولات
خونه > محصولات > شیر توپی > ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam

ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam

جزئیات محصول

محل منبع: چین

نام تجاری: JGPV

شرایط پرداخت و حمل و نقل

مقدار حداقل تعداد سفارش: 1Set

جزئیات بسته بندی: بسته بندی ایمنی جعبه تخته سه لا

زمان تحویل: 14 روز

شرایط پرداخت: L/C ، T/T ، Western Union

قابلیت ارائه: 500 مجموعه در هر ماه

بهترین قیمت رو بدست بیار
برجسته کردن:

ISO9001 Copper Ball Valve,ISO14001 Copper Ball Valve,Manual Copper Ball Valve

,

ISO14001 Copper Ball Valve

,

Manual Copper Ball Valve

برنامه::
عمومی
گواهی::
ISO9001 ، ISO14001
نوع متوسط::
آب ، بخار و روغن و غیره
اتصال::
رشته / فلنج / جوش داده شده
استاندارد یا غیر استاندارد::
استاندارد
راه جریان::
دو راه
فعال سازی::
دستی ، برقی ، پنوماتیک ، اتوماتیک
عملکرد آب بندی::
مهر و موم
دمای کار::
دمای طبیعی و دمای بالا
برنامه فشار::
فشار عادی
ضمانت کیفیت::
18 ماه
برنامه::
عمومی
گواهی::
ISO9001 ، ISO14001
نوع متوسط::
آب ، بخار و روغن و غیره
اتصال::
رشته / فلنج / جوش داده شده
استاندارد یا غیر استاندارد::
استاندارد
راه جریان::
دو راه
فعال سازی::
دستی ، برقی ، پنوماتیک ، اتوماتیک
عملکرد آب بندی::
مهر و موم
دمای کار::
دمای طبیعی و دمای بالا
برنامه فشار::
فشار عادی
ضمانت کیفیت::
18 ماه
ISO9001 ISO14001 Certified Manual Copper Ball Valve with Inner and Outer Wires for Water Oil and Steam
Manual Copper Ball Valve with Inner and Outer Wires
Manual copper ball valve with inner and outer wires
Product Introduction

Two piece internal thread ball valve is a common type of valve, which consists of valve body, valve ball, valve stem, valve seat and other components. Among them, the valve body is composed of two hemispheres connected by threads in the middle. The valve ball is spherical and can rotate inside the valve body to achieve switch control. The valve stem is a component that connects the valve ball and the handle, and controls the opening and closing of the valve ball by rotating the handle. The valve seat is the sealing gasket of the valve ball, which can ensure the sealing performance of the valve.

The characteristics of this valve are simple structure, good sealing, easy operation, and long service life.

Technical Specifications
Parameter Value
Nominal Diameter DN (mm) 15~200
Nominal Pressure PN (MPa) 1.6
Test Pressure (MPa) Strength (water): 2.4
Enclose (Water): 1.76
Main Components Body: WCB/CF8/CF8M
Valve ball: Stainless steel/Carbon steel
Seat: PTFE
Packing: Soft graphite
Shaft: 2Cr13
Handle: Ductile iron
Working temperature ≤150℃
Medium suitable Water, oil, steam
Key Features
  • The fluid resistance is small, and its resistance coefficient is equal to that of a pipe segment of the same length.
  • Simple structure, small size, and light weight.
  • Tight and reliable, plastic is widely used as the sealing surface material for ball valves with good sealing performance, and it has also been widely used in vacuum systems.
  • Easy to operate, quick opening and closing, only need to rotate from fully open to fully closed; Easy to control from a distance.
Product Gallery
محصولات مشابه